Five Double Glazing Window Repair Lessons From The Pros

· 6 min read
Five Double Glazing Window Repair Lessons From The Pros

Double Glazing Window Repair

Over time, double glazing could develop issues. For example, it may become difficult to open the windows or have doors that get stuck. These issues are easily solved.

Many homeowners try to fix these issues themselves but this should be left to experts. If you attempt to fix this without the proper tools and experience could cause damage.

Broken Panes

A damaged or broken window can be a frustrating and a hassle. It could let cold or hot air in your home, and leave a gap which allows dirt or moisture to get in. It can also lower your energy efficiency, as your AC and furnace must work harder to keep your home comfortable. You might be able, dependent on the weather conditions and whether your windows are double-paned or single-paned, to repair the damage for a short period of time by using silicone sealant. However the final solution will require the assistance of a professional.

A damaged window can be fixed with high-quality tape. A strip of tape placed over the crack will stop it from worsening. A crack that extends through the glass, or is too large to be covered with tape will require to be completely replaced.

Broken glass can be caused by many things: a pebble from a lawnmower that strikes the window a drink set down too heavily on a glass-topped coffee table or a pet's euphoric jump when you open the front door. The frames of your window could shift over time and crack the packaging material that holds the glass sheets.

Wear a pair of thick gloves in the event of a broken pane of glass. Put a cardboard container near the pane to collect any fragments. Remove the sash and work on an even surface, like the table. Wear a mask so as not to inhale the glass shattering.

After you have removed the old glass, clean any paint and varnish from the window frame. You can also use a heat gun to soften any old glazing putty or metal glazing points that kept the glass in the first place.

Then, you can measure the opening of the new glass. To allow for expansion and contraction it is recommended to purchase a replacement glass that is slightly smaller than the opening. Visit your local hardware store or home center cut the glass to these measurements.

Press the new glass into the frame. If there are gaps, fill them in with silicone caulk which is available at a local home improvement store. Then smooth the caulk using a putty knife. Add glazier's points to the corners and frames of the glass approximately every six inches so that the pane is held securely.

Condensation

Whether your double glazing windows are old or brand new, it's fairly common for them to develop condensation. This is particularly true in winter, when colder air is able to meet warm glass. It can be a problem but it is not usually an issue. This is because condensation on windows actually indicates that your double glazing is working correctly.

However, it can be an indication that the seal is not working and water is flowing through the gap between your window panes. You may notice an appearance of milky water on the window, or water beads appearing across the surface. This is something that needs to be addressed to stop mould, mildew or further damage.

Fortunately, condensation can be removed very easily. A technician will drill a small number of holes into the window frame, allowing the moisture trapped to escape. This process is referred to as defogging and can also aid in removing any stains caused by trapped moisture.

It is important to remember that defogging does not fix the root issue of a leaking seal. In fact, it may not even when the condensation has gone, since the damaged air that was in between the panes is still there. This could mean that you will still not get as much insulation from your windows as you would like to.

It's important to consult an expert as soon you discover that your windows are damp to determine the next steps. They might be able to recommend a solution, like putting vents in the windows to let fresh air in, but not letting warm air escape.

It is the last thing you need for your double-glazing to break down. This is particularly true when it will be costly to replace. With the right skills, equipment and experience, you can repair your double-glazed window to keep it in good working order for many years. Contact us today if you need double repairs to your glazing. We offer a full range of services that range from replacing one or more panes glass to installing energy-efficient upgrades.

Leaks

A leak can be a major issue because it means there is a possibility of damp ingress which can lead to damage. It can be costly to repair and can be a sign of further problems within your property, like dry rot or mold. This is why it's important to take care of leaks promptly.

If you notice that the windows of your double-glazed windows are noisy it's likely that the seal has been damaged. This may also mean that there is no gas called argon in the glass panes which is used for insulation purposes. A professional technician can reseal your window to solve this problem.

Double-glazed windows may become cloudy or misty due dirt. This is usually a sign that sealing is failing and the glass must be cleaned. This can be done by a professional using high-pressure water jets which will quickly remove any dirt or debris.



If condensation develops between the two panes of your double glazing, it is an indication that the seal is leaky and there isn't any argon left between the glass. This is a serious issue and could mean that your double glazing is no longer insulating your home in the way it should. The glass unit can be replaced, but you'll have to do it earlier rather than later, as the performance of your double-glazed window has been impacted.

If you have new double glazed windows that are under warranty, you must contact the company that installed them and report any issues with the units, or the sealing of the glass, as it is unlikely to be covered by the warranty. If you try to tamper with the units or try to make any repairs yourself, this could invalidate your warranty, which is why it is best to leave these repairs to the professionals. This is the reason we suggest using a specialist double glazing repair company.

Weather Damage

In areas with extreme weather conditions, double-glazed windows require a strong frame which can hold the glass panes. Ice snow, high winds and violent storms can cause damage to your windows. If you notice cracks, dents or holes in your window, call an expert for a double glazing repair.

If you notice water leaking out of the bottom of your window, this could be a sign there is a leaky seal within the window. This allows moisture to infiltrate your home. Your uPVC window frame or aluminum window frames might also be warping or bending. To fix this, you'll have to replace the window seal, and then insert it into the frame.

Window seals help to ensure that double-glazed windows are airtight and stop heat from getting out of your home, and also stopping condensation between the glass panes. The window seals are generally made of uPVC or aluminum and keep the glass in the right place. When the window seals break down, you can experience problems such as draughts, energy loss and windows that are misty.

The inability of the insulating gases in double-glazed windows is the common reason for misting windows. The argon gases hold the glass in place, and form an airtight seal, but if it is damaged or worn out, the gases could escape.  repair timber windows Repair My Windows And Doors  may cause condensation between glass panes if it escapes.

This issue can be resolved by replacing the window seal, then re-inserting the glass and then applying an anti-fogging agent to prevent condensation in the future. It is recommended to hire professionals to do the work for you.

While it is important to have double-glazed windows they are not impervious to damage and will require to be repaired periodically. Fortunately, many windows can be restored without the necessity of replacement. To do this, it's an ideal idea to have some basic tools at hand. You will need protective gloves, a tape measure, scotch tape or a transparent film and nail polish, and a sheet of plastic that can be cut to size.